Xtool X100 Pro2 Good Wok on Infiniti FX35 2005 and Infiniti G35x 2007!!!!

Xtool X100 Pro2 Good Wok on Infiniti FX35 2005 and Infiniti G35x 2007!!!!

Here we share a real test from customer who use X100 Pro2 sucessfully testing on Infiniti FX35 2005 and Infiniti G35x 2007

When he firstly test the device to read the “BCM code and release” the device can read the BCM but not show the old in and new pin

He was disappointed with it and he really want to  use it

So he format the SD card and then download the updatetool and download the software again .

Then the device works great on his two models

X100 Pro2 can support, but just need to test continually

The following is his email, we can have a reference

First Email:

Hello Jenny.

I hope everything is going well for you today. I was able to identify the issue with the XTOOL X100PRO2 SERIAL # PRO2-007789. It seems that there is some minor glitches with the Upgrade Tool software. (T-200) I would like to tell you what I did to find out what happened along with steps that were performed.
Step 1 – I deleted all the files from the XTOOL X100PRO2 by formatting the drive.
Step 2 -Using the Upgrade Tool software, I was to install ALL IMMOBILISER files unto the device. (Successfully)
Step 3- I connected the XTOOL X100PRO2 to my 2005 Infiniti FX35. I then performed the steps below.
A- Immobiliser / Infiniti / Read BCM and Release / Read BCM code / The BCM code was displayed but the OLD PIN and NEW PIN DID NOT!!
Step 4: I repeated step # 3 Immobiliser /Nissan/ Read BCM and Release / Read BCM code / The BCM code / OLD pin / NEW pin were display.
THE PROBLEM IS THAT THE CODES FOR BOTH MY CARS 2007 INIFINITI -G35 AND 2005 INFINITI – FX35 ONLY SHOW UP IF I CHOSE STEP #4. iI will proceed with programming the extra keys after they have been cut.
NOTE: By reprogramming the XTOOL X100PRO2, I am now able to perform other ODBI functions that were NOT working when I received the device yesterday.

You may want to address this with your programming team and inform them of this issue. Also ONLY TWO MODELS ARE LISTED IN THE INFINITI SECTION OF THE IMMOBOLISER SECTION. 2013 QX60 AND 2013 JX35….
I would suggest having having the factory check this out this will confuse many customers.
If you have any other questions or concerns, please feel free to contact me directly or you can leave me a message.

Best Regards,

The Second Email:

Greetings, I hope all is well. This is to inform you that i was able to correct the issue that i was having with the XTOOL X100PRO2. BOTH MY CARS 2007 INIFINITI -G35 AND 2005 INFINITI – FX35 ONLY SHOW UP IF I CHOOSE NISSAN, and are NOT displayed in the INFINITI section. Nevertheless, I was able reconfigure the XTOOL- X100PRO2 and programmed the extra keys to both my INIFINITI cars 2005 FX35 and 2007 G35 successfully.

 

The Third Email:

Hello Jenny,

The Pin Calculator and Immobilizer settings that you posted are correct.

Please Note: that both models Infiniti FX35 2005 and Infiniti G35x 2007 ARE Recognized under Nissan Category, as I was able to successfully-

1- retrieve the 4 PIN code (BCM and 4pin code are the same) as Nissan codes ( I checked) YES
2- Program Smart key – Type 1(with slot and Push-button) 2007 Infiniti G35x (Are the same as Nissan 4 pin codes) YES

I was also able to –

Read BCM code and release Steering lock(4 pin code) – YES
Remote
Type 1
Type 2

3- retrieve the 4 PIN code (Using Nissan 4 pin code and BCM) YES
4-Type 3(without slot and Push-button) YES

I programmed 2 extra keys – (1 for my 2005 FX35) and (1 for my 2007 G35x) I also cleared error codes on each model after repairing both.
The device DOES work on those models under Nissan. YES

Forth Email :

Hello Jenny,

The Pin Calculator and Immobilizer settings that you posted are correct.

Please Note: that both models Infiniti FX35 2005 and Infiniti G35x 2007 ARE Recognized under Nissan Category, as I was able to successfully-

1- retrieve the 4 PIN code (BCM and 4pin code are the same) as Nissan codes ( I checked) YES
2- Program Smart key – Type 1(with slot and Push-button) 2007 Infiniti G35x (Are the same as Nissan 4 pin codes) YES

I was also able to –

Read BCM code and release Steering lock(4 pin code) – YES
Remote
Type 1
Type 2

3- retrieve the 4 PIN code (Using Nissan 4 pin code and BCM) YES
4-Type 3(without slot and Push-button) YES

I programmed 2 extra smart keys – (1 for my 2005 FX35) – (without slot and Push-button) YES and
(1 for my 2007 G35x) – Type 1(with slot and Push-button)
I also cleared error codes on each model after repairing both models.
The device DOES support those models because it is recognized under Nissan. YES.

 

Fifth Email:

Hello Jenny,

My problem has been fixed.. I was able to read the pin and use the device.. I NO LONGER have ANY Problems.. I wanted to share with you the steps that were performed.. The x100 pro 2 supports Both Models 2005 FX35 and 2007 G35x under Nissan…
Everything is OK.. NO PROBLEMS!! Thank you.

Sixth Email:

 

Hello Jenny,

I share steps.. This works 100% 🙂

Step 1 – I deleted all the files from the XTOOL X100PRO2 by formatting the drive.
Step 2 -Using the Upgrade Tool software, I was to install ALL IMMOBILISER files unto the device. (Successfully)
Step 3- I connected the XTOOL X100PRO2 to my 2005 Infiniti FX35. I then performed the steps below.
A- Immobiliser / Infiniti / Read BCM and Release / Read BCM code / The BCM code was displayed but the OLD PIN and NEW PIN DID NOT!!
Step 4: I repeat step # 3 Immobiliser /Nissan/ Read BCM and Release / Read BCM code / The BCM code / OLD pin / NEW pin were display.

We had discussed for over 6 emails, and finally my customer tested succesfully , X100 Pro2 great on key programming