Here you will know how to quickly add and program 2006 Ford F-150 key by XTOOL X100 PAD2 in ONLY 1 minute! Check below steps:
Connect XTOOL X100 PAD2 with car directly via the OBD2 port.
Power on pad and go to main menu.
Choose “Ford” on Immobilization section.
Agree with the disclaimer as below:
XTOOL X100 PAD2 download firmware 100%. It’s ready!
It will automatically open latest software Ford V26.84. You can see “Pin Code Calculate”, “China Ford”, “USA Ford” and “AUS Ford” options available.
Choose “USA Ford”.
And you can see “Immobilizer” and “Smart Key Systems” options.
Choose “Immobilizer” and “F-150” then select car make year “2004-2008”.
Choose “Add a key” and use the new key to turn car ignition on.
Then it will ask if you want to open “Free Wait” mode that means you can directly program key no need to wait pin code calculating.
Click “Yes” to open.
Now you just wait key programming process complete 100%.
And message show “Program success”. XTOOL X100 PAD2 add 2006 Ford F-150 key OK!
Tool used in this guide: XTOOL X100 PAD2 Pro Key Programmer Standard Configuration with special function
