New Xtool X-100 C for Android IOS program 2015 Ford Edge key (Guide)

New arrival original Xtool X-100 C key programmer for Android IOS is key programmer& pin code reader for Ford, Mazda, Peugeot and Citroen. And this blog will demonstrate how Xtool X-100 C program 2015 Ford Edge key easily!


To program a new key for 2015 Ford Edge


  1. Get Xtool X-100 C Auto Key Programmer for Ford, Mazda, Peugeot and Citroen

xtool-x100-c-key-programmer-for-android-ios-1 xtool-x100-c-key-programmer-for-android-ios-2

  1. Download Xtool X-100 C software form Google Play or Apple Store

  1. Connect Xtool X-100 C with your car via OBD2 then connect X-100 C with Android or IOS device via Bluetooth.

After install Xtool X-100 C software on Android or IOS device, you will see interface menu as below:

xtool-x100-c-key-programmer-for-android-ios-Ford-Edge-key-4 xtool-x100-c-key-programmer-for-android-ios-Ford-Edge-key-3

Click “Immobilization” icon, choose “Ford”


Choose “China Ford” and then “Smart Key System”


Choose “Edge”


Select year “2015”


Now turn ignition on and click “OK”. Choose “Add a key” and open the hazard warning light then click “OK”.


Open and close the driver door. Turn ignition off then click “OK”.

Put the new key to be programmed into the card slot in hand box then click “OK”.

It will show “Program key success whether to program next key?”


In this way Xtool X-100 C key programmer add a new remote key for Ford Edge 2015!

If you need to program more than one key, click “YES” to continue, if not, click “NO” to exit.